Connecting Linksys Router To An Existing Network

The guide listed below to help them connect their Linksys devices to an existing network on their own. This is mainly part-time you need to contact technical support from Linksys.

Instructions:

Turn off all devices, namely the computer, a modem and an Internet router and disconnect the power cords from their stores of their respective companies. Disconnect modem Internet taking its Ethernet cable to the rear. Now, take a network cable, plug one end into the WAN or LAN, or WLAN port on the back of the router and the other end to your modem.

Connect to power your Linksys router with power. When you turn the unit on and wait for it to start. Reconnect the modem to the router via an Ethernet wire. After that plug the modem into a power outlet and turn it on.

Connect the computer power and the Linksys router. When the computer is running, and fully loaded, open your Internet browser. Type '192 .168.1.1 '(without the quotes) into the browser address bar and press Enter. Will bring the router's login page asks the user name and password.

Enter the connection information in their respective fields and click the Connect button again or press the Enter key to move to the configuration page. Once you are logged in, you must select the Wireless tab and basic wireless to configure wireless. Give a name for your wireless network (no name of your choice), choose a channel number Wi-Fi to work on, select a network mode and choose to enable Wireless SSID Broadcast, etc.

Select the Security tab and select either wireless security mode. WPA2 Personal or WEP, etc. Enter an alphanumeric key to secure your Wi-Fi against unauthorized access. You should note that this drop on a piece of paper and keep it in a safe place. This will help you connect to your network if you have forgotten or misplaced key by accident. It is also recommended that you write all the other details as the name of the wireless network user name and password for the router for the future. When finished, click Save settings and exit the router interface. Your Linksys router is now added to the existing network to provide enhanced wireless range and connectivity.